- Which boards can be used with LCD-OLinuXino-10TS?
- OLinuXino boards that carry the OLinuXino or SOM name and have an LCD connector would work with the LCD-OLinuXino-10TS. Unlike the previous iteration of displays, the LCD-OLinuXino-10TS has both 0.1'' connector and 0.05'' connector on its back. This allows the easy connection of boards with big LCD connector and also of boards with small LCD connector (like the LIME boards). You only need a single 40-40 cable with the same step on both sides to connect between the LCD and the board. Please note that the ten inch display is not recommended for boards with Allwinner A13 since the board migth lack the required computing power for a smooth operation(especially under Android).
- I bought LCD-OLinuXino-10TS but when I connect it to the A20-OLinuXino I receive no image on the display. What do I do wrong?
- The default A20-OLinuXino image is set for a HDMI display and 720p resolution. To use LCD with A20-OLinuXino you need to set proper display settings. Explanation of how to do it via the default script might be found in the wiki article for A20-OLinuXino: https://www.olimex.com/wiki/A20-OLinuXino-MICRO
- I bought LCD-OLinuXino-10TS and the SD card that has Linux image written on it. However the resolution I see on my VGA/LCD is not correct. What am I missing?
- You would need to change the configuration file via the ./change_display* script. Detailed information might be found at the wiki article of your OLinuXino board.
10-INCH LCD DISPLAY WITH RESISTIVE TOUCHPANEL, SUITABLE FOR AND TESTED WITH ALLWINNER OLINUXINO AND SOM BOARDS
A 10" LCD display with a resistive touch screen component, compatible with Olimex A10, A13, A10s, A20 Allwinner development boards with either 0.1" or 0.05" LCD connector. Suitable for Linux and Android video output.
- 10" WSVGA (V:1024 lines, H:600 pixels) display
- Resistive touch screen panel
- LED light-bar backlight system(9 parallel 3 serial)
- 16 200 000 colors
- Can be powered by the host board or externally
- DC-DC for LCD backlight
- 40 pin 0.1" and 0.05" connectors for direct connection to OLinuXino boards
- FR-4, 1.5 mm, red soldermask, component print
- Dimensions:222x143mm (8.74 x 5.63")
- Note that the cable to connect to your board is sold separately