RPi-UEXT

Provides a way of connecting numerous OLIMEX-made modules - sensors, IO boards, timers, biofeedback boards, etc, with Raspberry Pi on hardware level. The board is suitable for breadbording (instead of soldering you can use jumper cables for the GPIO pins).

FEATURES

• Raspberry Pi interface connector
• Female UEXT connector = SPI + I2C + UART
• 7 GPIO signals available on male header
• SMD jumpers provided for swap of both chip enable
• Designed with breadboarding spacing in mind
• Dimensions: 60 x 53/10 mm (23.7 x 2.1/0.4")

Note that both the 26-pin RPi cable and the 10-pin UEXT are sold separately