OLIMEXINO-328
OPEN
SOURCE HARDWARE INDUSTRIAL GRADE ARDUINO LIKE DEVELOPMENT BOARD
ARDUINO-like board with
ATMEGA328
FEATURES
ATMEGA328
microcontroller
can
work at different frequencies with an easy exchange of the quartz crystal on
socket.
DCDC
power supply allows power input voltage from 9 to 30V DC thus making
it possible to take virtually any power supply adapter on the market, and to
enable applications which are in the industrial power supply of 24VDC.
Carefully
selected, all of the components work reliably in the INDUSTRIAL
temperature range -25+85C so the board can be used in INDUSTIRAL
applications.
ULTRA
LOW POWER voltage regulators and the consumption is only few microamps,
which enables hand-held and battery powered applications.
Li-Ion
rechargeable battery power supply option with a BUILD-IN on board charger, so
that when you attach a battery, it is automatically charged and kept in this
state until the other power source (USB or external adapter) is removed and
then it will AUTOMATICALLY power the board - no jumpers, no switches!
Works
both on 3.3V and on 5V which can be selected with a switch, so 3.3V and 5V
shields can be used
UEXT connector which allows many
existing modules like RF, ZIGBEE, GSM, GPS to be connected
Allows
RTC - Real Time Clock.
NOISE
IMMUNE design, there are number of threads on Arduino forum for problems with
the RESET when the board works with motors - this is because Atmel
recommendations were omitted in the original design, we fixed this.
Separate
voltage regulator for the Analog part, which allows the ADC to be read
correctly without the digital noise pickup.
Optionally
if someone needs higher precision and temperature stability in Analog reading,
we have provided an Aref precise source.
The
LEDs and the BUTTONs are on the edge of the board so that they can be easily
accessed even if the boards have shields on them
All
of the components are LOWER than the connectors, so that the shields don't
interfere with them
A
Mini USB connector is used, which is common and used in most cell phones, so
you do not have to buy other cables
The
original Arduino design had a flaw and the connectors were not spaced at
0.1". This makes perfo board use impossible, so to keep the compatibility,
we have the same spacing but we added next to this a connector on 0.1"
which customers can use with perforated boards
All
signals on the connectors are printed on the top and the bottom of the board,
so when you check with a probe you will know exactly which port you are
measuring
4
mount holes make board attachment easier
DOCUMENTS
OLIMEX
board support package Arduino IDE installation
OLIMEXINO-328
European Declaration of Conformity
OLIMEXINO-328
UKCA Declaration of Conformity
HARDWARE
OLIMEXINO-328
latest schematic in
PDF format
OLIMEXINO-328
revision C source files
OLIMEXINO-328
revision B source files
SOFTWARE
OLIMEXINO-328
+ MOD-RTC example for I2C example
OLIMEXINO-328
and MOD-LCD-1x9 Arduino library
OLIMEXINO-328 + SHIELD-LCD16x2 - a library and set
of demo examples
OLIMEXINO-328
+ MOD-IO2 (firmware v3) - Arduino library
OLIMEXINO-328 and MOD-IO
library and example for Arduino IDE
OLIMEXINO-328
+ MOD-TC-MK2 (firmware v4) - Arduino library and example
OLIMEXINO-328
+ SHIELD-MIDI -
Arduino example
OLIMEXINO-328
+ magnetometer MOD-MAG - Arduino IDE demo library
OLIMEXINO-328
+ Ethernet module MOD-ENC28J60 example
OLIMEXINO-328
+ MOD-RFID1356-BOX -
instructions inside
OLIMEXINO-328
+ MOD-RS485-ISO (firmware 2) example for I2C - library and example
MOD-RS485 demo - refer to the text file
inside
OLIMEXINO-328
+ MOD-MP3-X example -
instructions in the archive
MOD-TC
temperature read demo code reads the temperature of thermocouple connected to MOD-TC
and OLIMEXINO-328
OLIMEXINO-328
+ bluetooth MOD-BT -
Arduino library and example
OLIMEXINO-328
+ Accelerometer MOD-SMB380 example - Arduino example
An excellent set of examples OLIMEXINO-328 and various modules (example names include Olimex string) - part of the souliss Arduino framework
Package Contents:
Olinuxino-328 Board x 1
Tags: OLIMEXINO-328