MSP430-JTAG-TINY-V2

LOW COST FAST USB JTAG FOR PROGRAMMING AND FLASH EMULATION

FEATURES

Suitable for most MSP430Fxxx flash microcontrollers

Uses TI standard 2x7 pin JTAG connector

Spy-By-Wire support for the newest TI MSP430 devices

Can supply the target with 3.3V fixed voltage 50mA maximum current, no short circuit protection(!)

The firmware uses version 2 of the MSP430 Debug stack - it is compatible with a large number

of software tools Compatible with TI's Code Composer Studio up to version 6.1.2

Compatible with IAR Embedded Workbench for MSP430 up to version 5.20.1 software for programming,

real time emulation, debugging, step by step program execution, breakpoints, memory dump etc everything

all high priced emulators do With IAR Kickstart versions you can write in assembler unlimited code size

and to write in C with 2K limit for all MSP430 microcontrollersWorks with free GCC C compiler and Insight MSP430 toolchain and debugger

Compatible with software tools that have support for MSP430 Debuck Stack version 2 (MSP430.dll v2).

Not compatible with newest versions of IAR Embedded Workbench for MSP430 (6.x.x and after)

Not compatible with newest versions of Code Composer Studio (6.1.3 and after)

For MAC-OS users: reported to work with PS X 10.4 and current Parallels

Dimensions 50x40 mm (2x1.6") + 20 cm (8") cable

DOCUMENTS

How to install Olimex USB MSP430 programmers

List of supported microcontrollers by the latest drivers

SPY-BI-WIRE connection please pay attention if you want to use SBW devices as the JTAG connection is different

How to install and use Olimex JTAGs with CCS 4.x

How to install and use Olimex JTAGs with CrossWorks

MSP430-JTAG-TINY-V2 European Declaration of Conformity

MSP430-JTAG-TINY-V2 UKCA Declaration of Conformity

HARDWARE

MSP430-JTAG-TINY-V2 JTAG connector layout

SOFTWARE

Windows drivers + MSP430-JTAG-TINY-V2 firmware version 2.0.0.7

OLIMEX MSP430-PROGRAMMER - GUI 1.3.0.4_CLI 2.0.1.2_DLL1.0.4.2/ 17.11.2011 freeware - a stand alone

software which allows you to program MSP430 devices without any 3rd party

MSP430 JTAG drivers ver.1.0.4.2 -26-JUL-2011 adds support for all devices released by TI to July 2011

MSP430 dll ver.1.0.4.1

MSP430 JTAG drivers ver.1.0.3.9

MSP430 Kick Start C compiler and debugger (free for assembly language, limited for C)

MSPGCC - free C compiler and debugger

MSPdebug support for Linux for MSP430-JTAG-TINY made by Daniel bear, tested to work fine in both

JTAG and SBW mode with MSPdebug 0.16