MOD-ENC28J60

DEVELOPMENT BOARD WITH UEXT CONNECTOR AND 10 MBIT ENC28J60 ETHERNET CONTROLLER

FEATURES

• MOD-ENC28J60 is the easiest way to add 10 Mbit ethernet connectivity to any of our boards with UEXT connector
• ENC28J60 Ethernet controller with UEXT connector for easy connection to our other development boards with UEXT connector
• LAN connector with build in transformer
• Two status LEDs on LAN connector
• SPI interface takes only few pins to add Ethernet interface to your microcontroller project
• UEXT 10 pin interface on 0.1" row pins header
• Backward compatibility with ENC28J60-H with 2 x 5 pin header
• PCB: FR-4, 1.5 mm (0,062"), green soldermask, white silkscreen component print
• Dimensions: 40x24 mm (1.55 x 0.95")
• Space between the pin rows: 20 mm (0.8")

 DOCUMENTS

• MOD-ENC28J60 user's manual
• MOD-ENC28J60 European Declaration of Conformity
• MOD-ENC28J60 UKCA Declaration of Conformity

 HARDWARE

• MOD-ENC28J60 Schematic

 SOFTWARE

• MOD-ENC28J60 example + OLIMEXINO-328 - Arduino example
• AVR fans now have also demo code for driving ENC28J60 with Bascom thanks to Ben Zijlstra from Netherlands
• ATMega32 example - ATMega32 and ENC28J60-H - written by Erik Rasmussen
• uIP1.0 demo code with LPC-P2106 and ENC28J60-H for CrossWorks written by Iain Derrington
• Embedded Linux and ENC28J60
• Compatible with Microchip's TCP-IP stack, which is part of Microchip Libraries for Applications - full featured software, very easy to configure and use with Microchip hardware